Ligature-Resistant ADA Compliant Grab Bar with V-Closure Strip, CCS-WH1140 SERIES:
Download Submittal Worksheet.
BestCare Ligature-Resistant Grab Bars are designed to help meet the needs of the disabled. Grab bars are constructed of 1.5 inch (38 mm) outer diameter type 304 stainless steel tubing with a 14 gauge ADA compliant V shaped closure strip welded to the bottom of the bar. Closure plate includes intermittent welds along wall plate and small holes opposite grab bar to prevent pooling of water and allow water to drain. Exposed surfaces are polished to a satin finish. Grab bars meet or exceed ANSI, UFAS and ADA requirements for structural strength and have a 1.5 inch (38 mm) minimum space between the grab bar and the mounting surface. Selection of appropriate length, configuration, adequate wall backing and installation dependent on application will determine compliance for accessibility. Consult applicable codes for complete requirements. Compliance is subject to the interpretation and requirements of the local code authority. Grab bars are not recommended for installation in areas of high security.
CCS_WH1140-24 Grab Bar with “V” Closure Strip, 24" Long
CCS_WH1140-30 Grab Bar with “V” Closure Strip, 30" Long
CCS_WH1140-36 Grab Bar with “V” Closure Strip, 36" Long
CCS_WH1140-42 Grab Bar with “V” Closure Strip, 42" Long
CCS_WH1140-48 Grab Bar with “V” Closure Strip, 48" Long
