Tubing: Fabricated of type 304 #18 ga stainless steel with a #4 satin finish and 1 1/2" outside diameter. All bends are formed by an automatic mandrel bending process. All bars maintain a constant 1 1/2" offset.
Flanges: Flanges are fabricated of 3" diameter, type 304 #11 ga stainless steel with #4 satin finish to match tubing. Flanges are heliarc welded to bar to form a one piece construction. Each flange has three (3) mounting points (1/4" dia.)
Closure Plate: Fabricated of #11 gauge stainless steel welded to the underside of the bar.
Strength: Bars that provide a 1 ""offset can support loads in excess of 900 lbs when properly installed. Other configurations can support loads excess of 250 lbs when properly installed. Grab bars must be installed properly to support the loads intended.
When measuring and ordering grab bars, remember bars are sized centerline to centerline.
Grab Bars comply with ADA Code 4.26.2
Non-chloric and non-abrasive cleaners should be used to clean surface of bars and flanges.
- 1 1/2" bar diameter
- Exposed Flange
- Powder Coating Available Upon Request
- Product Has Security Applications
Security Straight Grab Bar, with Satin or Peened Finish, 1.5" Bar Diameter, Exposed Mounting
12", 18", 24", 30", 36", 42", 48",